Abs Warning Light, ASC Warning/Operation Light And Brake Warning Light Check
WARNING: This page is about a different car, the 2015 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
Check that ABS and brake warning light, ASC warning/operation light illuminate as follows.
NOTE:
The brake warning light is used as a warning light for parking brake, brake fluid level, and EBD control.
- When the ignition switch is turned to the ON position, ABS and brake warning light, ASC warning/operation light illuminate.
- The ABS and brake warning light, ASC warning/operation light illuminate for three seconds*1 and then turn OFF*2.
- Otherwise, check the diagnostic trouble code.NOTE:
- *1 : The ABS warning light may stay ON until the vehicle speed reaches 10 km/h. As far as ABS-ECU stores any diagnostic trouble code related to the wheel speed sensor malfunction or the motor malfunction as past trouble, ABS-ECU continues illuminating the ABS warning light until it verifies that the malfunction for that code is resolved (startup check).
- *2 : The brake warning light does not turn OFF when the parking brake is applied or the brake fluid level is lowered.