LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2017 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Active Stability Control System (ASC) - With Diagnostics - Lancer) >> ASC Off Switch >> Inspection >> ASC Off Switch Continuity Check

ASC Off Switch Continuity Check

WARNING: This page is about a different car, the 2015 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. As shown in the illustration, connect the circuit tester to the ASC OFF switch as a single unit.
  2. Check the continuity when the ASC OFF switch is pressed and released.
    Item When the ASC OFF switch is released (No operation status) When the ASC OFF switch is pressed
    Continuity between terminal No. 1 and No. 2 No continuity Continuity exists. (2 Ω or less)
    Continuity between terminal No. 3 and No. 4 Continuity exists. Continuity exists.
    Fig 1: Checking ASC OFF Switch Continuity
    G09627260Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals