LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2017 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Continuously Variable Transaxle (CVT) Diagnosis & On-Vehicle Service - With Diagnostics - Lancer) >> Transaxle Assembly >> Removal And Installation >> Removal Service Points >> Transaxle Mounting Bracket Removal

Transaxle Mounting Bracket Removal

WARNING: This page is about a different car, the 2015 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place a garage jack against the transaxle case with a piece of wood in between to support the engine and transaxle assembly.
  2. Operate a garage jack so that the weight of the engine and transaxle assembly is not applied to the transaxle mounting insulator, and remove the transaxle mounting bracket.
scientia non olet · About LEMON Manuals