LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2017 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Continuously Variable Transaxle (CVT) Diagnosis & On-Vehicle Service - With Diagnostics - Lancer) >> Transaxle Assembly >> Removal And Installation >> Removal Service Points >> Torque Converter And Drive Plate Coupling Bolt Removal

Torque Converter And Drive Plate Coupling Bolt Removal

WARNING: This page is about a different car, the 2015 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the coupling bolts while turning the crankshaft.
  2. Fully push the torque converter into the transaxle side so that it does not remain on the engine side.
scientia non olet · About LEMON Manuals