LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2017 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Continuously Variable Transaxle (CVT) Diagnosis & On-Vehicle Service - With Diagnostics - Lancer) >> On-Vehicle Service >> Shift Lock Mechanism Check >> Component Parts Check >> Shift Lock Solenoid

Shift Lock Solenoid

WARNING: This page is about a different car, the 2015 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Measure the resistance between terminal No. 3 and No. 7 of the selector lever assembly connector.

    Standard value: 24 ± 1.2 Ω 

  2. When the resistance is outside the standard value, replace the selector lever assembly.
    Fig 1: Identifying Shift Lock Solenoid Connector Terminals
    G05375820Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals