Trouble Symptom Chart

WARNING: This page is about a different car, the 2015 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: During diagnosis, a diagnostic trouble code associated with other system may be set when the ignition switch is turned on with connector(s) disconnected. On completion, confirm all systems for diagnostic trouble code(s). If diagnostic trouble code(s) are set, erase them all.

Trouble symptom	Inspection procedure number	Reference
TCM cannot communicate with M.U.T.-III.	1	INSPECTION PROCEDURE 1: TCM CANNOT COMMUNICATION WITH SCAN TOOL.
Vehicle creeps in the N range.	2	INSPECTION PROCEDURE 2: VEHICLE CREEPS IN THE N RANGE.
Shock is experienced during N to D and/or N to R shifting operation.	3	INSPECTION PROCEDURE 3: SHOCK IS EXPERIENCED DURING N TO D AND/OR N TO R SHIFTING OPERATION.
Poor acceleration or incomplete shifting operation.	4	INSPECTION PROCEDURE 4: POOR ACCELERATION OR INCOMPLETE SHIFTING OPERATION
Cannot be changed in sport mode. < Vehicles with sport mode >	5	INSPECTION PROCEDURE 5: CANNOT BE CHANGED IN SPORT MODE. < VEHICLES WITH SPORT MODE >
Cannot be changed with paddle shift. < Vehicles with sport mode >	6	INSPECTION PROCEDURE 6: CANNOT BE CHANGED WITH THE PADDLE SHIFT. < VEHICLES WITH SPORT MODE >
The fluid temperature warning lamp illuminates too frequently.	7	INSPECTION PROCEDURE 7: THE FLUID TEMPERATURE WARNING LAMP ILLUMINATES TOO FREQUENTLY.