LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2017 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Continuously Variable Transaxle (CVT) Diagnosis & On-Vehicle Service - With Diagnostics - Lancer) >> Diagnosis >> Torque Converter Stall Test >> Judgment Of Torque Converter Stall Test Results

Judgment Of Torque Converter Stall Test Results

WARNING: This page is about a different car, the 2015 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Stall speed is high when selector lever is in both "D" and "R" ranges.
    • Malfunction of the torque converter (Torque converter and input shaft spline are slipping)
    • Malfunction of the valve body
    • Damaged wiring harness and connectors
    • Malfunction of TCM
  2. Stall speed is high only when selector lever is in the "D" range.
    • Forward clutch is slipping
  3. Stall speed is high only when the selector lever is in the "R" range.
    • Reverse brake is slipping
  4. Stall speed is low when selector lever is in both "D" and "R" ranges.
    • Malfunction of the torque converter
    • Line pressure is low
    • Low engine power
scientia non olet · About LEMON Manuals