LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2017 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (General Information - Lancer) >> Precautions Before Service >> How To Shift Lock Forced Release >> < TC-SST >

< TC-SST >

WARNING: This page is about a different car, the 2015 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the floor console box cup holder and the floor console panel assembly (Refer to FLOOR CONSOLE ASSEMBLY ).
  2. Turn the ignition switch to the position other than the LOCK (OFF) position.
  3. Insert a screwdriver or a similar tool from the section "A" shown in the figure. While pressing the shift lock forced release switch, move the shift lever.
    Fig 1: Locating Screwdriver Insertion Section
    G06468281Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    Fig 2: Identifying Shift Lock Release Switch
    G09618755Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals