Rear Axle Oil (With Limited Slip Differential): Change
WARNING: This page is about a different car, the 2015 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the filler plug.
- Remove the drain plug and drain oil.
- Tighten the drain plug to the specified torque.
Tightening torque: 64 ± 4 N.m (47 ± 2 ft-lb)
- Add the oil until the level comes to the lower portion of the filler plug hole.
Specified gear oil: Mitsubishi Motors Genuine LSD gear oil
- Tighten the filler plug to the specified torque.
Tightening torque: 49 ± 9 N.m (36 ± 6 ft-lb)