LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2017 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (General Information - Lancer) >> Maintenance Service (2.0L Engine Turbo) >> Drive Shaft Boots >> Inspect For Grease Leaks And Damage

Inspect For Grease Leaks And Damage

WARNING: This page is about a different car, the 2015 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. These components, which are permanently lubricated at the factory, do not require periodic lubrication. Damaged seals and boots should be replaced to prevent leakage or grease contamination.
  2. Inspect the dust cover and boots for proper sealing, leakage and damage. Replace them if defective.
    Fig 1: Identifying Drive Shaft Boots
    G09618869Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals