Transfer Oil (Check Oil Level And Condition/Change): Notes
WARNING: This page is about a different car, the 2015 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the filler plug and gasket.
- Check that the oil level is just below the lower edge of the filler plug hole.
- Check that the oil is not excessively foul and has moderate viscosity.
- Install the filler plug and new gasket, then tighten them to the specified torque.
Tightening torque: 32 ± 2 N.m (24 ± 1 ft-lb)