LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2017 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (General Information - Lancer) >> Maintenance Service (2.0L Engine Non-Turbo, 2.4L Engine) >> Transaxle Oil < M/T > >> Check Oil Level And Condition >> Transaxle Oil Replacement

Transaxle Oil Replacement

WARNING: This page is about a different car, the 2015 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the filler plug and gasket.
  2. Remove the drain plug and gasket, and drain the oil.
  3. Tighten the drain plug and new gasket, to the specified torque.

    Tightening torque: 49 ± 19 N.m (37 ± 14 ft-lb) 

  4. Fill with Mitsubishi Motors Genuine NEW MULTI GEAR OIL API classification GL-3, SAE 75W-80 until the level comes to the lower portion of filler plug hole.

    Quantity: 2.5 dm 3  (2.6 quarts) 

    Fig 1: Identifying Filler And Drain Plug
    G05374019Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  5. Tighten the filler plug and new gasket to the specified torque.

    Tightening torque: 49 ± 19 N.m (37 ± 14 ft-lb) 

    Fig 2: Identifying Filler Plug Hole, Gasket And Filler Plug
    G06672032Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals