Rear Axle Oil (Check Oil Level)
WARNING: This page is about a different car, the 2015 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the filler plug.
- Check that gear oil level is not 8 mm (0.3 inch) below the bottom of filler plug hole.
- Tighten the filler plug to the specified torque.
Tightening torque: 32 ± 2 N.m (23 ± 2 ft-lb)
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.