MULTIPORT Fuel Injection (MFI) - 3.0L - DTC P0602 - U1180

• DTC P0602: Control Module Programming Error
  • Technical Description
  • Monitor Execution
  • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • DTC Set Conditions
    • Logic Flow Chart
    • Check Condition
    • Judgment Criterion
  • Fail-Safe And Backup Function
  • OBD-II Drive Cycle Pattern
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be stored are:)
  • Diagnosis
• DTC P0604: Internal Control Module Random Access Memory (RAM) Error
  • Technical Description
  • DTC Set Conditions
    • Check Condition
    • Judgment Criterion
  • Fail-Safe And Backup Function
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be stored are:)
  • Diagnosis
• DTC P0606: Engine Control Module Main Processor Malfunction
  • Engine Control Module Main Processor Malfunction Circuit
  • Circuit Operation
  • Technical Description
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • DTC Set Conditions
    • Check Condition
    • Judgment Criterion
  • Fail-Safe And Backup Function
  • OBD-II Drive Cycle Pattern
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be stored are:)
  • Diagnosis
• DTC P060B: Internal Control Module A/D Processing Performance Problem
  • Technical Description
  • Monitor Execution
  • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • DTC Set Conditions
    • Check Condition
    • Judgment Criterion
  • Fail-Safe And Backup Function
  • OBD-II Drive Cycle Pattern
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be stored are:)
  • Diagnosis
• DTC P060D: Internal Control Module Accelerator Pedal Position Performance Problem
  • Technical Description
  • Monitor Execution
  • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • DTC Set Conditions
    • Logic Flow Chart
    • Check Condition
    • Judgment Criterion
  • Fail-Safe And Backup Function
  • OBD-II Drive Cycle Pattern
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be stored are:)
  • Diagnosis
• DTC P061A: Internal Control Module Torque Performance Problem
  • Technical Description
  • Monitor Execution
  • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • DTC Set Conditions
    • Logic Flow Chart
    • Check Conditions
    • Judgment Criterion
  • Fail-Safe And Backup Function
  • OBD-II Drive Cycle Pattern
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be stored are:)
  • Diagnosis
• DTC P061C: Internal Control Module Engine RPM Performance Problem
  • Technical Description
  • Monitor Execution
  • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • DTC Set Conditions
    • Logic Flow Chart
    • Check Condition
    • Judgment Criterion
  • Fail-Safe And Backup Function
  • OBD-II Drive Cycle Pattern
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be stored are:)
  • Diagnosis
• DTC P061F: Internal Control Module Throttle Actuator Controller Performance Problem
  • Technical Description
  • DTC Set Conditions
    • Check Condition
    • Judgment Criterion
  • Fail-Safe And Backup Function
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be stored are:)
  • Diagnosis
• DTC P0622: Generator FR Terminal Circuit Malfunction
  • Circuit Operation
  • Technical Description
  • DTC Set Conditions
    • Check Conditions
    • Judgment Criteria
  • Fail-Safe And Backup Function
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be stored area:)
  • Diagnosis
• DTC P062F: Internal Control Module EEPROM Error
  • Technical Description
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
    • Other Monitor (There is no temporary DTC set in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • DTC Set Conditions
    • Logic Flow Chart
    • Check Condition
    • Judgment Criterion
  • Fail-Safe And Backup Function
  • OBD-II Drive Cycle Pattern
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
  • Diagnosis
• DTC P0630: Vehicle Identification Number (VIN) Malfunction
  • Technical Description
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • DTC Set Conditions
    • Logic Flow Chart
    • Check Conditions
    • Judgment Criterion
  • Fail-Safe And Backup Function
  • OBD-II Drive Cycle Pattern
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be stored are:)
  • Diagnosis
• DTC P0638: Throttle Actuator Control Motor Circuit Range/Performance Problem
  • Throttle Actuator Control Motor Circuit Range/Performance Problem Circuit
  • Circuit Operation
  • Technical Description
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • DTC Set Conditions
    • Check Conditions
    • Judgment Criterion
    • Judgment Criteria
    • Check Condition
  • Fail-Safe And Backup Function
  • OBD-II Drive Cycle Pattern
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be stored are:)
  • Diagnosis
• DTC P0642: Throttle Position Sensor Power Supply
  • Technical Description
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • DTC Set Conditions
    • Check Condition
    • Judgment Criterion
  • Fail-Safe And Backup Function
  • OBD-II Drive Cycle Pattern
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be stored are:)
  • Diagnosis
• DTC P0657: Throttle Actuator Control Motor Relay Circuit Malfunction
  • Circuit Operation
  • Technical Description
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • DTC Set Conditions
    • Check Condition
    • Judgment Criterion
  • Fail-Safe And Backup Function
  • OBD-II Drive Cycle Pattern
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be stored are:)
  • Diagnosis
• DTC P1231: Active Stability Control Plausibility (Vehicles with ASC)
  • Technical Description
  • DTC Set Conditions
    • Check Condition
    • Judgment Criterion
  • Fail-Safe And Backup Function
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be stored are:)
  • Diagnosis
• DTC P1238: Mass Airflow Sensor Plausibility (Torque Monitor)
  • Technical Description
  • Monitor Execution
  • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • DTC Set Conditions
    • Notes
    • Check Conditions
    • Judgment Criterion
    • Check Condition
  • Fail-Safe And Backup Function
  • OBD-II Drive Cycle Pattern
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be stored are:)
  • Diagnosis
• DTC P1240: Ignition Angle
  • Technical Description
  • DTC Set Conditions
    • Check Condition
    • Judgment Criterion
  • Fail-Safe And Backup Function
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be stored are:)
  • Diagnosis
• DTC P1242: Fail Safe Control Monitor
  • Technical Description
  • DTC Set Conditions
    • Check Condition
    • Judgment Criterion
  • Fail-Safe And Backup Function
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be stored are:)
  • Diagnosis
• DTC P1243: Inquiry/Response Error
  • Technical Description
  • DTC Set Conditions
    • Check Condition
    • Judgment Criterion
  • Fail-Safe And Backup Function
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be stored are:)
  • Diagnosis
• DTC P1247: A/T Plausibility
  • Technical Description
  • DTC Set Conditions
    • Check Condition
    • Judgment Criterion
  • Fail-Safe And Backup Function
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be stored are:)
  • Diagnosis
• DTC P1248: AWD Plausibility (AWD)
  • Technical Description
  • DTC Set Conditions
    • Check Condition
    • Judgment Criterion
  • Fail-Safe And Backup Function
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be stored are:)
  • Diagnosis
• DTC P1506: Idle Control System RPM Lower Than Expected at Low Temperature
  • Technical Description
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
    • Other Monitor (There is no temporary DTC set in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • DTC Set Conditions
    • Logic Flow Chart
    • Check Conditions
    • Judgment Criterion
  • Fail-Safe And Backup Function
  • OBD-II Drive Cycle Pattern
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
  • Diagnosis
• DTC P1507: Idle Control System RPM Higher Than Expected at Low Temperature
  • Technical Description
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
    • Other Monitor (There is no temporary DTC set in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • DTC Set Conditions
    • Logic Flow Chart
    • Check Conditions
    • Judgment Criterion
  • Fail-Safe And Backup Function
  • OBD-II Drive Cycle Pattern
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
  • Diagnosis
• DTC P1590: TCM to ECM Communication Error in Torque Reduction Request
  • Technical Descriptions Of Monitor Methods
  • Monitor Execution
  • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • DTC Set Conditions
    • Logic Flow Chart
    • Check Condition
    • Judgment Criterion
  • Fail-Safe And Backup Function
  • OBD-II Drive Cycle Pattern
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be stored are:)
  • Diagnosis
• DTC P1603: Battery Backup Line Malfunction
  • Technical Description
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • DTC Set Conditions
    • Logic Flow Chart
    • Check Conditions
    • Judgment Criterion
  • Fail-Safe And Backup Function
  • OBD-II Drive Cycle Pattern
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be stored are:)
  • Diagnosis
• DTC P2066: Fuel Level Sensor (sub) Circuit Range/Performance (AWD)
  • Technical Description
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • DTC Set Conditions
    • Logic Flow Chart
    • Check Condition, Judgment Criterion
  • Fail-Safe And Backup Function
  • OBD-II Drive Cycle Pattern
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be stored are:)
  • Diagnosis
• DTC P2096: Post Catalyst Fuel Trim System too Lean (bank 1)
  • Technical Description
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
    • Other Monitor (There is no temporary DTC set in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • DTC Set Conditions
    • Logic Flow Chart
    • Check Conditions
    • Judgment Criterion
  • Fail-Safe And Backup Function
  • OBD-II Drive Cycle Pattern
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
  • Diagnosis
• DTC P2097: Post Catalyst Fuel Trim System too Rich (bank 1)
  • Technical Description
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
    • Other Monitor (There is no temporary DTC set in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • DTC Set Conditions
    • Logic Flow Chart
    • Check Conditions
    • Judgment Criterion
  • Fail-Safe And Backup Function
  • OBD-II Drive Cycle Pattern
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
  • Diagnosis
• DTC P2098: Post Catalyst Fuel Trim System too Lean (bank 2)
  • Technical Description
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
    • Other Monitor (There is no temporary DTC set in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • DTC Set Conditions
    • Logic Flow Chart
    • Check Conditions
    • Judgment Criterion
  • Fail-Safe And Backup Function
  • OBD-II Drive Cycle Pattern
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
  • Diagnosis
• DTC P2099: Post Catalyst Fuel Trim System too Rich (bank 2)
  • Technical Description
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
    • Other Monitor (There is no temporary DTC set in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • DTC Set Conditions
    • Logic Flow Chart
    • Check Conditions
    • Judgment Criterion
  • Fail-Safe And Backup Function
  • OBD-II Drive Cycle Pattern
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
  • Diagnosis
• DTC P2100: Throttle Actuator Control Motor Circuit (Open)
  • Circuit Operation
  • Technical Description
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • DTC Set Conditions
    • Check Conditions
    • Judgment Criterion
  • Fail-Safe And Backup Function
  • OBD-II Drive Cycle Pattern
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be stored are:)
  • Diagnosis
• DTC P2101: Throttle Actuator Control Motor Magneto Malfunction
  • Circuit Operation
  • Technical Description
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • DTC Set Conditions
    • Check Condition
    • Judgment Criterion
  • Fail-Safe And Backup Function
  • OBD-II Drive Cycle Pattern
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be stored are:)
  • Diagnosis
• DTC P2122: Accelerator Pedal Position Sensor (main) Circuit Low Input
  • Circuit Operation
  • Technical Description
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • DTC Set Conditions
    • Logic Flow Chart
    • Check Condition
    • Judgment Criterion
  • Fail-Safe And Backup Function
  • OBD-II Drive Cycle Pattern
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be stored are:)
  • Diagnosis
• DTC P2123: Accelerator Pedal Position Sensor (main) Circuit High Input
  • Circuit Operation
  • Technical Description
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • DTC Set Conditions
    • Logic Flow Chart
    • Check Condition
    • Judgment Criterion
  • Fail-Safe And Backup Function
  • OBD-II Drive Cycle Pattern
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be stored are:)
  • Diagnosis
• DTC P2127: Accelerator Pedal Position Sensor (sub) Circuit Low Input
  • Circuit Operation
  • Technical Description
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • DTC Set Conditions
    • Logic Flow Chart
    • Check Condition
    • Judgment Criterion
  • Fail-Safe And Backup Function
  • OBD-II Drive Cycle Pattern
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be stored are:)
  • Diagnosis
• DTC P2128: Accelerator Pedal Position Sensor (Sub) Circuit High Input
  • Circuit Operation
  • Technical Description
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • DTC Set Conditions
    • Logic Flow Chart
    • Check Condition
    • Judgment Criterion
  • Fail-Safe And Backup Function
  • OBD-II Drive Cycle Pattern
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be stored are:)
  • Diagnosis
• DTC P2135: Throttle Position Sensor (Main and Sub) Range/Performance Problem
  • Throttle Position Sensor (Main And Sub) Range/Performance Problem Circuit
  • Circuit Operation
  • Technical Description
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • DTC SET CONDITIONS (Range/Performance problem - relation between main and sub)
    • Logic Flow Chart
    • Check Conditions
    • Judgment Criterion
  • Fail-Safe And Backup Function
  • OBD-II Drive Cycle Pattern
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be stored are:)
  • Diagnosis
• DTC P2138: Accelerator Pedal Position Sensor (main and sub) Range/Performance Problem
  • Accelerator Pedal Position Sensor (Main And Sub) Range/Performance Circuit
  • Circuit Operation
  • Technical Description
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
    • Other Monitor (There is no temporary DTC set in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • DTC SET CONDITIONS Range/Performance problem - relation between main and sub
    • Logic Flow Chart
    • Check Condition
    • Judgment Criterion
  • Fail-Safe And Backup Function
  • OBD-II Drive Cycle Pattern
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
  • Diagnosis
• DTC P2228: Barometric Pressure Circuit Low Input
  • Technical Description
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • DTC Set Conditions
    • Logic Flow Chart
    • Check Conditions
    • Judgment Criterion
  • Fail-Safe And Backup Function
  • OBD-II Drive Cycle Pattern
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be stored are:)
  • Diagnosis
• DTC P2229: Barometric Pressure Circuit High Input
  • Technical Description
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • DTC Set Conditions
    • Logic Flow Chart
    • Check Conditions
    • Judgment Criterion
  • Fail-Safe And Backup Function
  • OBD-II Drive Cycle Pattern
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be stored are:)
  • Diagnosis
• DTC P2237: Linear Air-Fuel Ratio Sensor Positive Current Control Circuit/Open (bank 1)
  • Circuit Operation
  • Technical Description
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • DTC Set Conditions
    • Logic Flow Chart
    • Check Conditions
    • Judgment Criteria
  • Fail-Safe And Backup Function
  • OBD-II Drive Cycle Pattern
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be stored are:)
  • Diagnosis
• DTC P2240: Linear Air-Fuel Ratio Sensor Positive Current Control Circuit/Open (bank 2)
  • Circuit Operation
  • Technical Description
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • DTC Set Conditions
    • Logic Flow Chart
    • Check Conditions
    • Judgment Criteria
  • Fail-Safe And Backup Function
  • OBD-II Drive Cycle Pattern
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be stored are:)
  • Diagnosis
• DTC P2243: Linear Air-Fuel Ratio Sensor Reference Voltage Circuit/Open (bank 1)
  • Circuit Operation
  • Technical Description
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • DTC Set Conditions
    • Logic Flow Chart
    • Check Conditions
    • Judgment Criteria
  • Fail-Safe And Backup Function
  • OBD-II Drive Cycle Pattern
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be stored are:)
  • Diagnosis
• DTC P2247: Linear Air-Fuel Ratio Sensor Reference Voltage Circuit/Open (bank 2)
  • Circuit Operation
  • Technical Description
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • DTC Set Conditions
    • Logic Flow Chart
    • Check Conditions
    • Judgment Criteria
  • Fail-Safe And Backup Function
  • OBD-II Drive Cycle Pattern
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be stored are:)
  • Diagnosis
• DTC P2251: Linear Air-Fuel Ratio Sensor Negative Current Control Circuit/Open (bank 1)
  • Circuit Operation
  • Technical Description
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • DTC Set Conditions
    • Logic Flow Chart
    • Check Conditions
    • Judgment Criteria
  • Fail-Safe And Backup Function
  • OBD-II Drive Cycle Pattern
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be stored are:)
  • Diagnosis
• DTC P2252: Heated Oxygen Sensor Offset Circuit Low Voltage
  • Heated Oxygen Sensor Offset Circuit Low Voltage Circuit
  • Circuit Operation
  • Technical Description
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • DTC Set Condition
    • Logic Flow Chart
    • Check Condition
    • Judgment Criterion
  • Fail-Safe And Backup Function
  • OBD-II Drive Cycle Pattern
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be stored are:)
  • Diagnosis
• DTC P2253: Heated Oxygen Sensor Offset Circuit High Voltage
  • Heated Oxygen Sensor Offset Circuit High Voltage Circuit
  • Circuit Operation
  • Technical Description
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • DTC Set Conditions
    • Logic Flow Chart
    • Check Condition
    • Judgment Criterion
  • Fail-Safe And Backup Function
  • OBD-II Drive Cycle Pattern
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be stored are:)
  • Diagnosis
• DTC P2254: Linear Air-Fuel Ratio Sensor Negative Current Control Circuit/Open (bank 2)
  • Circuit Operation
  • Technical Description
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • DTC Set Conditions
    • Logic Flow Chart
    • Check Conditions
    • Judgment Criteria
  • Fail-Safe And Backup Function
  • OBD-II Drive Cycle Pattern
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be stored are:)
  • Diagnosis
• DTC P2530: Ignition Switch Run Position Circuit
  • Ignition Switch-IG Circuit
  • Circuit Operation
  • Technical Description
  • DTC Set Conditions
    • Check Condition
    • Judgment Criterion
  • Fail-Safe And Backup Function
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be stored are:)
  • Diagnosis
• DTC U0101: Transmission Control Module Timeout
  • Notes
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • DTC Set Conditions
    • Logic Flow Chart
    • Check Conditions
    • Judgment Criterion
  • Fail-Safe And Backup Function
  • OBD-II Drive Cycle Pattern
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be stored are:)
  • Diagnosis
• DTC U0114: AWD-ECU Timeout (AWD)
  • Notes
  • DTC Set Conditions
    • Check Conditions
    • Judgment Criterion
  • Comment
    • Current Trouble
    • Past Trouble
  • Fail-Safe And Backup Function
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be stored are:)
  • Diagnosis
• DTC U0121: ASC-ECU timeout
  • Notes
  • DTC Set Conditions
    • Check Conditions
    • Judgment Criterion
  • Comment
    • Current Trouble
    • Past Trouble
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be stored are:)
  • Diagnosis
• DTC U0131: Electric Power Steering-ECU timeout
  • Notes
  • DTC Set Conditions
    • Check Conditions
    • Judgment Criterion
  • Comment
    • Current Trouble
    • Past Trouble
  • Fail-Safe And Backup Function
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be stored are:)
  • Diagnosis
• DTC U0141: ETACS-ECU Timeout
  • Notes
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • DTC Set Conditions
    • Logic Flow Chart
    • Check Conditions
    • Judgment Criterion
  • Comment
    • Current Trouble
    • Past Trouble
  • Fail-Safe And Backup Function
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be stored are:)
  • Diagnosis
• DTC U0167: Immobilizer Communication Error
  • Notes
  • DTC Set Conditions
    • Check Conditions
    • Judgment Criteria
  • Comment
    • Current Trouble
    • Past Trouble
  • Fail-Safe And Backup Function
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be stored are:)
  • Diagnosis
• DTC U0415: Invalid Data Received from ASC-ECU
  • Notes
  • DTC Set Conditions
    • Check Conditions
    • Judgment Criterion
  • Comment
    • Current Trouble
    • Past Trouble
  • Fail-Safe And Backup Function
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be stored are:)
  • Diagnosis
• DTC U1180: Combination Meter Timeout
  • Notes
  • Descriptions Of Monitor Methods
  • Monitor Execution
  • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
    • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
    • Sensor (The sensor below is determined to be normal)
  • DTC Set Conditions
    • Logic Flow Chart
    • Check Conditions
    • Judgment Criterion
  • Comment
    • Current Trouble
    • Past Trouble
  • Fail-Safe And Backup Function
  • OBD-II Drive Cycle Pattern
  • TROUBLESHOOTING HINTS (The most likely causes for this code to be stored are:)
  • Diagnosis