Diagnostic Trouble Code Chart
CAUTION:
During diagnosis, a diagnostic trouble code associated with other system may be stored when the ignition switch is turned on with connector(s) disconnected. On completion, confirm all systems for diagnostic trouble code(s). If diagnostic trouble code(s) are stored, erase them all.
| Diagnostic trouble code No. | Diagnostic item | ||
|---|---|---|---|
| B2480 | Electromagnetic clutch short | ||
| B2481 | Pulse sensor power supply short | ||
| B2482 | No detection of neutral SW | ||
| B2483 | No detection of full latch SW | ||
| B2484 | Right-side touch sensor open circuit | ||
| B2485 | Left-side touch sensor open circuit | ||
| B2488 | ECU internal error | ||
| U0141 | ETACS-ECU CAN timeout | ||
| U0155 | Meter CAN timeout | ||
| U0164 | A/C CAN timeout | ||
| U0168 | KOS CAN timeout | ||
| U0184 | AUDIO CAN timeout | ||
| U0245 | AND CAN timeout | ||
| U1000 | OSS CAN timeout(1) | ||
| U1190 | No receive fault defect signal | ||
| U1195 | Coding not completed | ||
|
NOTE:
|
|||