Diagnostic Trouble Code Chart
CAUTION:
On troubleshooting, if the ignition switch is turned ON while disconnecting connector(s), DTC(s) associated with other system may be stored. On completion, confirm all systems for DTC(s). If DTC(s) are stored, erase them all.
| DTC No. | Diagnostic item |
|---|---|
| U0141 | ETACS CAN timeout |
| U0155 | Meter CAN timeout |
| U0164 | A/C CAN timeout |
| U0168 | WCM/F.A.S.T. CAN timeout |
| U0230 | Power Gate CAN timeout |
| U1000 | OSS CAN timeout |
| U1190 | No receive fault detect signal |
| U1195 | Coding not completed |