Diagnostic Trouble Code Table
CAUTION:
During diagnosis, a DTC code associated with another system may be stored when the ignition switch is turned on with connector(s) disconnected. After completing the repair, confirm all systems for DTC code(s). If DTC code(s) are stored, erase them all.
DIAGNOSTIC TROUBLE CODE TABLE
| Diagnostic trouble code No. | Diagnostic item | Reference |
|---|---|---|
| B10C0 | Interior temperature sensor system (short circuit) | |
| B10C1 | Interior temperature sensor system (open circuit) | |
| B1003 | Mode dial SW error | Refer to DIAGNOSTIC TROUBLE CODE CHART in HEATING, AIR CONDITIONING & VENTILATION - WITH DIAGNOSTICS article |
| B1018 | Temperature control dial SW error | |
| B1021 | Fan dial SW error | |
| B1031 | Air thermo sensor system (short circuit) | |
| B1032 | Air thermo sensor system (open circuit) | |
| B1034* | Ambient air temperature sensor system (short circuit) | |
| B1035* | Ambient air temperature sensor system (open circuit) | |
| B1079 | Refrigerant leaks | |
| U0019 | Bus off (CAN1) | |
| U0141 | ETACS-ECU time-out | |
| U0151 | SRS-ECU time-out | |
| U0154 | Occupant classification-ECU time-out | |
| U0155 | Combination meter time-out | |
| U0168 | WCM/F.A.S.T. CAN time-out | |
| U1000 | OSS-ECU time-out | |
| U1415 | Coding not completed | |
|
NOTE:
The diagnostic trouble codes marked by * are stored from the ETACS-ECU.
|
||