LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> RVR ES >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Continuously Variable Transaxle (CVT) On-Vehicle Service - With Diagnostics) >> On-Vehicle Service >> CVT Control Component Check >> Shift Lock Mechanism Check >> Component Parts Check >> Shift Lock Solenoid

Shift Lock Solenoid

WARNING: This page is about a different variant/trim than selected.
  1. Measure the resistance between terminal No.3 and No.7 of the selector lever assembly connector.

    Standard value: 24 ± 1.2 Ω 

  2. When the resistance is outside the standard value, replace the selector lever assembly.
    Fig 1: Identifying Selector Lever Assembly Connector Terminal
    G09669732Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals