LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> RVR ES >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Continuously Variable Transaxle (CVT) On-Vehicle Service - With Diagnostics) >> Diagnosis >> How To Initialize CVT Learned Value >> Initialization Procedure

Initialization Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Move the selector lever to the "P" range and turn the ignition switch to the "LOCK" (OFF) position. Then, connect the scan tool to the data link connector.
  2. Turn the ignition switch to the "ON" position, and then move the selector lever to the "R" range.
  3. Depress the accelerator pedal while depressing the brake pedal. (Engine is not running.) Using the scan tool, execute the clear DTC function for the CVT ECU (even if no codes are set).
    NOTE: Performing initialization of the learned value will also erase the diagnostic trouble code.
scientia non olet · About LEMON Manuals