LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> RVR ES >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Continuously Variable Transaxle (CVT) On-Vehicle Service - With Diagnostics) >> Diagnosis >> Diagnostic Trouble Code Procedures >> DTC P0841: Abnormality in Line Pressure Sensor Function >> Diagnosis

DTC P0841: Abnormality in Line Pressure Sensor Function: Diagnosis

WARNING: This page is about a different variant/trim than selected.
  1. STEP 1. Check other diagnostic trouble codes. 

    Q: Are other diagnostic trouble codes stored? 

    1. YES:  Go to the appropriate troubleshooting.
    2. NO:  Go to Step 2.
  2. STEP 2. Line pressure check 

    Carry out "hydraulic test" (Refer to HYDRAULIC PRESSURE TEST  ).

    Q: Is the check result normal? 

    1. YES:  Go to Step 3.
    2. NO:  Repair according to the hydraulic pressure test diagnosis table.
  3. STEP 3. Symptom recheck after erasing diagnostic trouble code 

    Q: Is the check result normal? 

    1. YES:  Intermittent malfunction
    2. NO:  Replace TCM.