| CANNOT COMMUNICATE WITH KOS-ECU USING THE SCAN TOOL. |
1 |
Inspection Procedure 1: Cannot communicate with KOS-ECU using the scan tool
|
| THE KEYLESS OPERATION KEY CANNOT BE REGISTERED USING SCAN TOOL. |
2 |
Inspection Procedure 2: The keyless operation key cannot be registered using scan tool
|
| ABNORMALITY IN KOS-ECU POWER SUPPLY AND GROUND CIRCUITS. |
3 |
Inspection Procedure 3: Abnormality in KOS-ECU power supply and ground circuits
|
| KEYLESS OPERATION WARNING DISPLAY DOES NOT DISAPPEAR. |
4 |
Inspection Procedure 4: Keyless operation warning display does not disappear
|
| NO DOOR WILL BE LOCKED OR UNLOCKED BY OPERATING A LOCK/UNLOCK SWITCH ON ANY DOOR. |
5 |
Inspection Procedure 5: No door will be locked or unlocked by operating a lock/unlock switch on any door
|
| DRIVER'S DOOR LOCK/UNLOCK SWITCH DOES NOT WORK. |
6 |
Inspection Procedure 6: Driver's door lock/unlock switch does not work
|
| FRONT PASSENGER'S DOOR LOCK/UNLOCK SWITCH DOES NOT WORK. |
7 |
Inspection Procedure 7: Front passenger's door lock/unlock switch does not work
|
| THE LOCK SWITCH AND LIFTGATE LOCK RELEASE HANDLE OF THE LIFTGATE LOCK RELEASE HANDLE DO NOT WORK. |
8 |
Inspection Procedure 8: The lock switch and open switch of the liftgate lock release handle do not work
|
| THE LOCK SWITCH OF THE LIFTGATE LOCK RELEASE HANDLE DOES NOT PERFORM THE LOCKING OPERATION. |
9 |
Inspection Procedure 9: The lock switch of the liftgate lock release handle does not perform the locking operation
|
| LIFTGATE LOCK RELEASE HANDLE DOES NOT PERFORM THE UNLOCKING OPERATION. |
10 |
Inspection Procedure 10: The open switch of the liftgate lock release handle does not perform the unlocking operation
|
| KOS timer lock function does not work. |
11 |
Inspection Procedure 11: KOS timer lock function does not work
|
| KEYLESS ENTRY SYSTEM DOES NOT WORK. |
12 |
Inspection Procedure 12: Keyless entry system does not work
|
| THE TIMER LOCK FUNCTION DOES NOT WORK AFTER THE DOORS HAVE BEEN UNLOCKED BY THE KEYLESS ENTRY SYSTEM. |
13 |
Inspection Procedure 13: The timer lock function does not work after the doors have been unlocked by the keyless entry system
|
| KEYLESS ENTRY HAZARD LIGHT ANSWERBACK FUNCTION, THE DOME LIGHT ANSWERBACK FUNCTION OR THE HORN ANSWERBACK FUNCTION DOES NOT WORK NORMALLY. |
14 |
Inspection Procedure 14: Keyless entry hazard light answerback function, the dome light answerback function or the horn answerback function does not work normally
|
| OUTER TONE ALARM DOES NOT SOUND. |
15 |
Inspection Procedure 15: Outer tone alarm does not sound
|
| POWER DOOR LOCKS WITH SELECTIVE UNLOCKING DOES NOT WORK. |
16 |
Inspection Procedure 16: Power door locks with selective unlocking does not work
|