LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> RVR ES >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Exterior Trim >> Sunshade Illumination - Vehicles With Sunshade >> Symptom Procedures >> Inspection Procedure 1: The sunshade illumination does not illuminate >> Technical Description (Comment)

Technical Description (Comment)

With the ignition switch turned to the ACC or ON position, if the sunshade illumination does not illuminate at all, the sunshade illumination changeover switch, ETACS-ECU, wiring harness, or connector may have a problem. When the sunshade illumination changeover switch is set to "OFF", the sunshade illumination will not illuminate. Therefore, check that the switch is not set to "OFF".

scientia non olet · About LEMON Manuals