LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> RVR ES >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Interior >> Sunshade Assembly >> Disassembly And Reassembly >> Reassembly Service Points >> >> B << SLIDING ROOF No.1 TRIM SUB ASSEMBLY/SLIDING ROOF No.2 TRIM SUB ASSEMBLY REASSEMBLY

>> B << SLIDING ROOF No.1 TRIM SUB ASSEMBLY/SLIDING ROOF No.2 TRIM SUB ASSEMBLY REASSEMBLY

  1. Install the sliding roof No.1 trim sub assembly to the sliding roof housing frame No.1.
    CAUTION: Attach the hooks of the sliding roof No.1 trim sub assembly to the sliding roof No.2 trim sub assembly securely. If the hooks are not attached securely, the assemblies will be dislocated when the sunshade lid is operated.
  2. Attach the hooks of the sliding roof No.1 trim sub assembly to the sliding roof No.2 trim sub assembly.
    CAUTION: Attach the hooks of the sliding roof No.2 trim sub assembly to the sliding roof No.3 trim sub assembly securely. If the hooks are not attached securely, the assemblies will be dislocated when the sunshade lid is operated.
  3. Attach the hooks of the sliding roof No.2 trim sub assembly to the sliding roof No.3 trim sub assembly.
  4. Install the drive cable of the sliding roof housing frame No.1 to the joint of the sliding roof No.1 trim sub assembly from the front side of the vehicle.
scientia non olet · About LEMON Manuals