<< B >> Headlining Removal

To remove the clip, insert a vinyl cord into a clearance between the clip and the headlining, and pass it around the clip. Then, pull out the clip downwards while pulling the vinyl cord.

Fig 1: Inserting Vinyl Cord Into Clearance Between Clip And Headlining

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Remove the headlining by inserting the special tool in the clearance of the dual lock fastener. < Vehicles with roof window glass >

Fig 2: Inserting Special Tool Into Clearance Of Dual Lock Fastener

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.