Fuel Level Sensor Float Height

Remove the fuel pump module (Refer to ON-VEHICLE SERVICE < Main >, P.13B-9 < Sub >).

When float is moved to contact the float arm on the stopper, ensure that stopper positions "F" (height A) and "E" (height B) are within the standard value.

FUEL LEVEL SENSOR FLOAT HEIGHT SPECIFICATION

Float position	Float height {mm (in)}
Stopper position "F" (height A)	201.6 (7.9)
Stopper position "E" (height B)	18.0 (0.7)

FUEL LEVEL SENSOR FLOAT HEIGHT SPECIFICATION

Float position	Float height {mm (in)}
Float position	Main	Sub
Stopper position "F" (height A)	166.2 (6.5)	48.8 ± 3.0 (1.9 ± 0.1)
Stopper position "E" (height B)	38.8 (1.5)	238.0 ± 3.0 (9.4 ± 0.1)

Fig 1: Identifying Fuel Level Sensor Float Height

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.