Warning Indicator
WARNING: This page is about a different variant/trim than selected.
When a malfunction occurs in the ACD system, the figure (A) will be displayed on the information screen of multi information display, and the mode display (B) will be turned off.
Subsequently, the screen returns to the one before the warning display, and then "!" indicator (C) will illuminate.
If the indicator (C) continues to be displayed on the information screen of multi information display, check the diagnostic trouble code that is set.
FAIL-SAFE REFERENCE
| Diagnostic trouble code No. | Item | Control content |
|---|---|---|
| C2203 | VIN not written | Normal control |
| C1614 | Parking brake switch | A warning is given to the driver with the trouble displayed to the multi information display, but the control is maintained because the vehicle behavior is not affected. |
| C1624 | EEPROM | |
| C161F | AWC actuator protection 1 | A warning is given to the driver by the flashing of multi information display control mode, and the control is stopped. |
| C1621 | AWC actuator protection 2 | |
| Others (other than above) | A warning is given to the driver with the trouble displayed to the multi information display, and the control is stopped. | |
NOTE:
All the troubles will return to a normal status when the ignition switch is turned from OFF to ON.