LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Mechanical - 2.0L Turbo - Lancer) >> Valve Stem Seal >> Removal And Installation >> Removal Service Points >> << C >> Valve Tappet Removal

<< C >> Valve Tappet Removal

WARNING: This page is about a different variant/trim than selected.
CAUTION:
  • Do not use pliers or other tools to remove the valve tappets. Always remove them by hand.
  • When reusing the removed valve tappet, it has to be installed in the same position as before. Be sure to put a tab that shows the original installation position on the valve tappet when storing it.

Remove all of the valve tappets by hand.

Fig 1: Removing Valve Tappets
G05374144Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.