LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 92 (Outside Mirror) >> Outside Mirror >> Inspection >> Door Mirror Assembly Operation Check

Door Mirror Assembly Operation Check

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

Remove the door trim, and then connect the battery to the door mirror assembly connector to check that the door mirror operates.

Battery connection Operation direction
  • Connect terminal 12 to the negative battery terminal.
  • Connect terminal 5 to the positive battery terminal.
 Up
  • Connect terminal 12 to the positive battery terminal.
  • Connect terminal 5 to the negative battery terminal.
 Down
  • Connect terminal 13 to the negative battery terminal.
  • Connect terminal 12 to the positive battery terminal.
 Right
  • Connect terminal 13 to the positive battery terminal.
  • Connect terminal 12 to the negative battery terminal.
 Left
Fig 1: Door Mirror Assembly Connector End View
G09666411Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals