LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Windshield Wiper & Washer System) >> Troubleshooting >> Trouble Symptom Chart >> INSPECTION PROCEDURE 2: The windshield wipers do not work when the wiper switch is at the "INT", "Washer" or "Mist" position. However, the wipers work at low speed when the switch is at the "Lo" and "Hi" position >> Technical Description (Comment)

Technical Description (Comment)

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

It is assumed that the windshield wipers are at fail-safe mode due to a failure of the LIN bus lines.

scientia non olet · About LEMON Manuals