LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (Rear Axle - AWD) >> Differential Carrier Assembly >> Disassembly >> Final Drive Gear Teeth Contact Adjustment >> << G >> Drive Pinion Front Bearing Outer Race Removal

<< G >> Drive Pinion Front Bearing Outer Race Removal

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

Use special tool remover bar (MB990939) to remove the drive pinion front bearing outer race.

Fig 1: Removing Drive Pinion Front Bearing Outer Race Using Special Tool Remover Bar (MB990939)
G09665791Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals