LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (Rear Axle - AWD) >> Differential Carrier Assembly >> Disassembly >> Final Drive Gear Teeth Contact Adjustment >> << F >> Drive Pinion Rear Bearing Inner Race Removal

<< F >> Drive Pinion Rear Bearing Inner Race Removal

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

Use special tool rear axle shaft bearing remover (MB990560) to remove the drive pinion rear bearing inner race.

Fig 1: Removing Drive Pinion Rear Bearing Inner Race
G09665790Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals