LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Charging System) >> Generator Assembly >> DISASSEMBLY AND REASSEMBLY - 2.4L Engine >> Reassembly Service Points >> >> B << Pulley Installation

>> B << Pulley Installation

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Use care not to damage the rotor.

With the pulley side facing up, hold the rotor in a vice and install the pulley.

Fig 1: Installing Regulator Assembly Pulley
G09664721Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.