LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (Heating, Air Conditioning & Ventilation - With Diagnostics) >> Automatic A/C Diagnosis >> Symptom Procedures >> INSPECTION PROCEDURE 1: Communication with the scan tool (M.U.T.-III) is not possible >> Comments On Trouble Symptom

Comments On Trouble Symptom

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

If communication with all other systems is not possible, there is a high possibility that there is a malfunction of the diagnosis line. If only the A/C system can not communicate with the scan tool (M.U.T.-III), the heater controller assembly (A/C-ECU) may be defective.

scientia non olet · About LEMON Manuals