LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Active Stability Control System (ASC) - With Diagnostics) >> Hydraulic Unit >> Removal And Installation >> Removal Service Points >> << A >> ASC-Ecu Harness Connector Disconnection

<< A >> ASC-Ecu Harness Connector Disconnection

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

Operate the lock lever to disconnect the ASC-ECU harness connector as shown in the figure.

Fig 1: Disconnecting ASC-ECU Harness Connector
G09666011