LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (Combination Meter On-Vehicle Service - With Diagnostics) >> Symptom Procedures >> Inspection Procedure 1: Power Supply Circuit Check; Inspection Procedure 2: The Odometer And The Trip Meter Are Not Displayed.; Inspection Procedure 3: No Needle Meters Work.; Inspection Procedure 4: If The Ignition Switch Is Turned To The On Position, The Indicator And Warning Lights Do Not Illuminate Normally >> Technical Description (Comment)

Technical Description (Comment)

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

If the odometer and trip meter is not displayed or no needle meters work, power supply to the combination meter, or the combination meter itself may have a problem.

scientia non olet · About LEMON Manuals