LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Automatic Transaxle On-Vehicle Service - With Diagnostics) >> Automatic Transaxle Diagnosis < A/T > >> Diagnostic Trouble Code Procedures >> DTC P0729, P0732, P0733, P0734, P0735: 6th, 2nd, 3rd, 4th, 5th Gear Ratio >> Descriptions Of Monitor Methods < DTC P0733 >

Descriptions Of Monitor Methods < DTC P0733 >

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

After 3rd gear is achieved for 2 seconds, the engine runup*1 is detected for 2 seconds.

*1: The actual gear ratio deviates from the target gear ratio to the high engine (turbine) speed.

scientia non olet · About LEMON Manuals