LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 50 (Engine Overhaul - 2.4L) >> Rocker Arms And Camshaft >> Removal And Installation >> Removal Service Points >> << B >> Nut/Adjusting Screw Removal

<< B >> Nut/Adjusting Screw Removal

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • When removing the adjusting screw and nut, pay attention to the rocker arm not to be damaged.
  • If the male screw threads are especially damaged, pay attention to the female screw threads not to be damaged when removing the screw.

Remove the nuts and adjusting screws from the rocker arm.

scientia non olet · About LEMON Manuals