LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 50 (Engine Overhaul - 2.4L) >> Exhaust Manifold >> Removal And Installation >> Removal Service Point >> << A >> Heated Oxygen Sensor Removal

<< A >> Heated Oxygen Sensor Removal

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

Use special tool oxygen sensor wrench (MB991953) to remove the heated oxygen sensor.

Fig 1: Identifying Oxygen Sensor Wrench (MB991953)
G09663468Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals