<< A >> Hose Clip/Radiator Lower Hose Disconnection
WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
- Make mating marks on the radiator lower hose and the hose clip as shown to install them in the original position.
- Break off the tip of hose clip claw and spread out the hose clip, then disconnect the radiator lower hose.NOTE: If there is a hose clip claw, the hose clip cannot spread to capacity because the claw contacts the hose clip.