>> B << Radiator Lower Hose/Hose Clip Connection
WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Never reuse the hose clip whose claw is broken off to prevent the rusting.
- Make mating mark on a new hose clip in the same position as the remove one.
- Insert the radiator lower hose until the protrusion of the water inlet fitting.
- Align the mating marks on the radiator lower hose and hose clip.
- Remove the hose clip claw and shorten the hose clip, then install the radiator lower hose.