>> B << Hose Clip/Radiator Lower Hose Connection
WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Never reuse the hose clip whose claw is broken off to prevent the rusting.
- Make mating mark on a new hose clip in the same position as the remove one.
- Insert the radiator hose until the protrusion of the water inlet fitting.
- Align the mating marks on the radiator hose and hose clamp, and then connect the radiator hose.
- Remove the hose clip claw to tighten the radiator hose.