Seat Belt Buckle Switch Check (Passenger's Side)

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

TEMPERATURE SPECIFICATION

Power supply connection	Check condition	Normal condition
Connect terminal No. 1 to the negative power supply (5 V) terminal. Connect terminal No. 2 to the positive power supply (5 V) terminal.	When the seat belt is connected	12 - 17 mA
	When the seat belt is disconnected	4 - 7 mA

Fig 1: Checking Seat Belt Buckle Switch (Passenger Side)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.