LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Interior) >> Seat Assembly >> Front Seat Assembly >> Installation Service Point >> >> A << Front Seat Assembly Installation

>> A << Front Seat Assembly Installation

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. Confirm that both the seat slides are locked, and then temporarily tighten all the bolts shown in the figure so that no load is applied to the front seat cushion.
  2. Tighten all the bolts to the specified torque.

    Tightening torque: 43 ± 8 N.m (32 ± 5 ft-lb) 

    Fig 1: Locating Front Seat Assembly And Bolts
    G09666440Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals