<< B >> Headlining Assembly Removal

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

To remove the clip, insert a vinyl cord into a clearance between the clip and the headlining, and pass it around the clip. Then, pull out the clip downwards while pulling the vinyl cord.

Fig 1: Pulling Out Clip
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Take out the headlining assembly through the front passenger's door opening.

Fig 2: Removing Headlining Assembly Through Front Passenger Door Opening
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.