LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Engine Mechanical - 2.4L) >> Valve Stem Seal >> Removal And Installation >> Installation Service Points >> >> D << V. V. T. Sprocket, Rocker Arm And Camshaft Assembly Installation

>> D << V. V. T. Sprocket, Rocker Arm And Camshaft Assembly Installation

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the V. V. T. sprocket, rocker arm and camshaft assembly (Refer to >> A << ROCKER COVER ASSEMBLY INSTALLATION  ).
  2. Attach the special tool for holding the engine assembly as during removal.
  3. Remove the engine oil pan installed temporarily.
scientia non olet · About LEMON Manuals