LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Engine Mechanical - 2.4L) >> Oil Pan >> Removal And Installation >> Removal Service Points >> << B >> Engine Oil Pan Removal

<< B >> Engine Oil Pan Removal

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine oil pan mounting bolts.
    CAUTION: Do not forcibly drive in special tool oil pan FIPG cutter (MD998727) to avoid damage to the engine oil pan seal surface of cylinder block assembly.
  2. Insert special tool oil pan FIPG cutter (MD998727) from the engine oil pan removal groove of the cylinder block assembly.
  3. Lightly tap the special tool with a hammer to slide the engine oil pan seal surface, cut off the liquid gasket, and remove the engine oil pan.
    Fig 1: Identifying Crankshaft Pulley And Engine Oil Pan
    G09663372
    Fig 2: Identifying Engine Oil Pan And Filter
    G09663373
    Fig 3: Removing Engine Oil Pan Using Tool
    G09663374
scientia non olet · About LEMON Manuals