LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Intake & Exhaust System) >> Air Cleaner >> Removal And Installation - 3.0L Engine >> Installation Service Points >> >> A << Mass Airflow Sensor Installation

>> A << Mass Airflow Sensor Installation

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the mass airflow sensor to the air cleaner cover with care not to damage the O-ring.
    CAUTION: Do not over-tighten. If the mounting screw is over-tightened, the air cleaner cover can be damaged.
  2. Tighten the mounting screws to the specified torque.

    Tightening torque: 1.5 ± 0.3 N.m (13 ± 2 in-lb) 

scientia non olet · About LEMON Manuals