| THE IGNITION SWITCH (ACC) SIGNAL IS NOT RECEIVED. |
1 |
Inspection Procedure 1: The ignition switch (ACC) signal is not received
|
| THE IGNITION SWITCH (IG1) SIGNAL IS NOT RECEIVED. |
2 |
Inspection Procedure 2: The ignition switch (IG1) signal is not received
|
| THE KEY REMINDER SWITCH SIGNAL IS NOT RECEIVED. < VEHICLES WITHOUT KOS > |
3 |
Inspection Procedure 3: The key reminder switch signal is not received. < Vehicles without KOS >
|
| THE FRONT DOOR LOCK ACTUATOR (DRIVER'S SIDE) SIGNAL IS NOT RECEIVED. |
4 |
Inspection Procedure 4: The front door lock actuator (driver's side) signal is not received
|
| THE FRONT DOOR SWITCH (DRIVER'S SIDE) SIGNAL IS NOT RECEIVED. |
5 |
Inspection Procedure 5: The front door switch (driver's side) signal is not received
|
| THE FRONT DOOR SWITCH (PASSENGER'S SIDE) SIGNAL IS NOT RECEIVED. |
6 |
Inspection Procedure 6: The front door switch (passenger's side) signal is not received
|
| THE REAR DOOR SWITCH (RH) SIGNAL IS NOT RECEIVED. |
7 |
Inspection Procedure 7: The rear door switch (RH) signal is not received
|
| THE REAR DOOR SWITCH (LH) SIGNAL IS NOT RECEIVED. |
8 |
Inspection Procedure 8: The rear door switch (LH) signal is not received
|
| THE LIFTGATE LOCK ACTUATOR < VEHICLES WITHOUT POWER LIFTGATE > OR LIFTGATE LATCH < VEHICLES WITH POWER LIFTGATE > SIGNAL IS NOT RECEIVED. |
9 |
Inspection Procedure 9: The liftgate lock actuator < vehicles without power liftgate > or liftgate latch < vehicles with power liftgate > signal is not received
|
| THE HAZARD WARNING LIGHT SWITCH SIGNAL IS NOT RECEIVED. |
10 |
Inspection Procedure 10: The hazard warning light switch signal is not received
|
| THE COLUMN SWITCH SIGNAL IS NOT RECEIVED. |
11 |
Inspection Procedure 11: The column switch signal is not received
|
| THE STOPLIGHT SWITCH SIGNAL IS NOT RECEIVED. |
12 |
Inspection Procedure 12: The stoplight switch signal is not received
|
| THE REMOTE CONTROLLED MIRROR SWITCH (FOLD SWITCH) SIGNAL IS NOT RECEIVED. |
13 |
Inspection Procedure 13: The remote controlled mirror switch (fold switch) signal is not received
|
| THE ASC OFF SWITCH SIGNAL IS NOT RECEIVED. |
14 |
Inspection Procedure 14: The ASC OFF switch signal is not received
|
| THE HOOD LATCH SWITCH SIGNAL IS NOT RECEIVED. |
15 |
Inspection Procedure 15: The hood latch switch signal is not received
|
| THE LDW SWITCH SIGNAL IS NOT RECEIVED. |
16 |
Inspection Procedure 16: The LDW switch signal is not received
|
| THE CRUISE CONTROL SWITCH (ACC DISTANCE SWITCH) SIGNAL IS NOT RECEIVED. |
17 |
Inspection Procedure 17: The Cruise control switch (ACC distance switch) signal is not received
|
| THE FCM SWITCH SIGNAL IS NOT RECEIVED. |
18 |
Inspection Procedure 18: The FCM switch signal is not received
|
| THE ECO MODE SWITCH SIGNAL IS NOT RECEIVED. |
19 |
Inspection Procedure 19: The hazard indicator assembly (ECO mode switch) signal is not received
|
| THE TRANSMISSION RANGE SWITCH SIGNAL IS NOT RECEIVED. |
20 |
Inspection Procedure 20: The transmission range switch signal is not received
|