LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Supplemental Restraint System (SRS) - With Diagnostics) >> Seat Belt Pre-TENSIONER Disposal Procedures >> UNDEPLOYED Seat Belt With Pre-TENSIONER Disposal

UNDEPLOYED Seat Belt With Pre-TENSIONER Disposal

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • If the vehicle is to be scrapped or otherwise disposed of, operate the seat belt pre-tensioner and lap pre-tensioner inside the vehicle.
  • When replacing the seat belt with pre-tensioner, the seat belt pre-tensioner and lap pre-tensioner of old parts must be operated outside the vehicle.
  • Since a large amount of smoke is produced when the seat belt pre-tensioner and lap pre-tensioner is operated, avoid residential areas whenever possible. Also, do not perform the operation near the smoke detector.
  • Since there is substantial report when the seat belt pre-tensioner and lap pre-tensioner pre-tensioner is operated, avoid residential areas whenever possible. If anyone is nearby, give warning of the impending noise.
  • Suitable ear protection must be put on by personnel performing these procedures or by people in the immediate area.