LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Supplemental Restraint System (SRS) - With Diagnostics) >> Occupant Classification Sensor >> Removal And Installation >> Installation Service Points >> >> A << Pre-Installation Inspection

>> A << Pre-Installation Inspection

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

Check the occupant classification sensor for dents, breakage and bending and measure the resistance between the terminals, even when installing a new occupant classification sensor.

scientia non olet · About LEMON Manuals